Categories

Contact Us

CANGAS Systems Company Limited

B516, GID International Center, 27 Nanbinhe Road, Xicheng District, Beijing, China 100055.

Factory: Shidai Road East, Gu'an Industrial Zone, Langfang City, Hebei Provice.

Phone: +86-10-63338130

Fax: +86-1063338230

E-mail: sales@can-gas.com

Website: www.can-gas.net

www.can-gas.com

Knowledge

Home > Knowledge > Content

nitrogen generator how it works

CANGAS Systems Company Limited | Updated: Sep 02, 2015

PSA Nitrogen Generator

PSA  Full Name: Pressure Swing Adsorption

PSA is a new gas seperation technology and it gained rapid development between 1960s and1970s. Its raw material is air, and it uses an efficient sorlid adsorbent to seperate oxygen and nitrogen.

Introduction of the technology

At present, in the area of making oxygen and nitrogen, the commonly used tools are carbon molecular and zeolite molecular sieve. Its operation is based on the expanding speed at the surface.

Scope

PSA is a new nitrogen-making technology which fast developed after 1970s. Comparing with the traditional methods, it is highly automatic, easy to process, quick to produce gas. Besides, the energy consumption is low, the refineness can adjusted according to customers' requirements, the maintence is convenient, the operating cost is low and the adaptability is strong, therefore it is competitive among the nitrogen-making equipments under 1000Nm3 and gains applauds of nitrogen users of small and medium size and becomes the first choice for them.

Freezing Nitrogen Making VS PSA

Along with the fast development of industry, nitrogen is widely used in different industries such as chemistry, electricity, food and machinery. China's need for nitrogen increase by 8% every year. Nitrogen is difficult to react to other chemical gases, so in the general situations, the requirment of the refineness should be 99.99%, some even ask for 99.998%. Liquid nitrogen is a convenient freezing source and widely used in food and medical industry, as well as storing sperm in the husbandry.

Pure nitrogen cannot be refined directly from the nature, the method is air seperation. The method is divided into deep freezing, PSA and barrier seperation.

 The Process of PSA and a Brief Introduction of Equipments

1. The Process of the Procedure

The air penetrates into the compressor after swiping dust and impurities through the air filtering machine and is compressed into the needed amount of pressure, the clean compressed air is output after strictly getting rid of oil,water and dust, the goal is to keep the longevity of the molecular sieve.There are two adsorber equiped with carbon molecular sieve.

Brief Introduction of the Deep Freezing Nitrogen Making

The typical deep freezing nitrogen-making process is made up of air compression, air seperation and vaporization of liquid nitrogen

2.Air compression and Purification

After the filtering of dust and machinery, the air goes into the air compressor and it will be compressed into needed pressure, and then goes into the air freezing machine to calm the heat of air to get rid of other impurities.

Air Seperation

The purified air enters the main heat exchanger and will be freezed to saturation degree and sent to the bottom of rectifying tower, then the nitrogen will be produced on the top. Through the throttling, the liquid air will evaporate. Part of the nitrogn will be reflux, the rest will be production. The exhaust gas produced by freezing evaporator will reheat to 130K in the expander to produce cold air for the air distillation. Part of the expanding air will be used for reusing and refrigeration, then will be discharged into atmosphere.

3.Nitrogen-From Liquid to Gas

The liquid nitrogen coming from the distillation tower will be stored in the storage tank, and when the separation equipment is under examination, the liquid nitrogen in the tank will go to vaporizer and be heated and sent to the nitrogen pipeline. The freezing technique can produce nitrogen has over 99.999%fineness.

Our Service

Established in 1998, CAN GAS SYSTMES COMPANY LIMITED, a reputable manufacturer of on-site nitrogen and oxygen plants and kinds of gases systems, has a production and R&D center with an area of 28,000 square meters, and passed ISO9001 quality management certification, BV certification and CE certification.

Feedback

Tel: +86-10-63338130

Contact Us

Address: B516, GID International Center, 27 Nanbinhe Road, Xicheng District,Beijing, China 100055.

Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML

Copyright © CANGAS Systems Company Limited

share: