Categories

Contact Us

CANGAS Systems Company Limited

B516, GID International Center, 27 Nanbinhe Road, Xicheng District, Beijing, China 100055.

Factory: Shidai Road East, Gu'an Industrial Zone, Langfang City, Hebei Provice.

Phone: +86-10-63338130

Fax: +86-1063338230

E-mail: sales@can-gas.com

Website: www.can-gas.net

www.can-gas.com

News

Home > News > Content

Liquid/cryogenic Nitrogen Generator For Sale

CANGAS Systems Company Limited | Updated: Jun 23, 2016
Company Information

Cryogenic technology liquid nitrogen generator

    CANGAS Systems Company Limited, identified as the Beijing Key High-tech Corporation, is one of the initial companies involved in air separation industry. CANGAS is committed to continuously providing core value to customers in all industries. With 27,000 square meters’ production base, five national patents and ISO9001:2008 Certificate of Quality Management System Certification, CAN GAS has been an integration of R&D, design, manufacture, sales, service. Over the past ten years, CANGAS has successfully provided over 1000 sets of air separation systems for many industries in over 40 countries and regions.

    CANGAS Systems have a range of PSA nitrogen & oxygen generators, membrane nitrogen & oxygen generators, nitrogen purification systems etc, and are widely used in industries of petroleum, oil & gas, chemicals, electronics, metallurgy, coals, pharmaceuticals, aerospace, autos, glass, plastics, food, medical treatment, grain, etc. With years research in air separation technology and rich solution experiences in various industries, CANGAS sticks to providing our clients with more reliable, more economical, more convenient professional gas solutions.

    By now we have supplied CANGAS® systems for clients including GE USA, WILMAR International Singapore, DEGUSSA Group Germany, SAMSUNG, ORION Korea, China Petrol, Sinopec, etc. CANGAS has built up a global distributor system covering Russia, Bangladesh, Indonesia, Pakistan etc. During the 2008 Olympics, CANGAS was selected by Beijing Food Safety Test Center as the supplier for nitrogen generator to test the Olympic food.

    We have an experienced professional team always ready to be at your service. The sales engineers carefully analyze your specified requirements and offer suitable solutions for you. The after-sale service system guarantees swift response to your problems within 24 hours and their resolutions in the shortest time. CANGAS is responsible for after-sales services to nitrogen/oxygen generators and other related equipment offered by us. Besides, CANGAS global distributor system can provide prompt professional localized service.

    CANGAS is dedicated to supplying with our customers with more reliable, more economical and more convenient air separation solutions and professional service.

Cryogenic technology

Cryogenic technology

Cryogenic technology liquid nitrogen generator

    Cryogenics is the science that addresses the production and effects of very low temperatures. The word originates from 

the Greek words 'kryos' meaning "frost" and 'genic' meaning "to produce." Under such a definition it could be used to 

include all temperatures below the freezing point of water (0 C). However, Prof. Kamerlingh Onnes of the University 

of Leiden in the Netherlands first used the word in 1894 to describe the art and science of producing much lower

temperatures. He used the word in reference to the liquefaction of permanent gases such as oxygen, nitrogen, hydrogen, 

and helium. Oxygen had been liquefied at -183 C a few years earlier (in 1887), and a race was in progress to liquefy the 

remaining permanent gases at even lower temperatures. The techniques employed in producing such low temperatures 

were quite different from those used somewhat earlier in the production of artificial ice. In particular, efficient heat 

exchangers are required to reach very low temperatures. Over the years the term cryogenics has generally been used to 

refer to temperatures below approximately -150 C.

    According to the laws of thermodynamics, there exists a limit to the lowest temperature that can be achieved, which is 

known as absolute zero. Molecules are in their lowest, but finite, energy state at absolute zero. Such a temperature is 

impossible to reach because the input power required approaches infinity.

    However, temperatures within a few billionths of a degree above absolute zero have been achieved. Absolute zero is the zero 

of the absolute or thermodynamic temperature scale. It is equal to -273.15 C or -459.67 F. The metric or SI (International 

System) absolute scale is known as the Kelvin scale whose unit is the kelvin (not Kelvin) which has the same magnitude 

as the degree Celsius. The symbol for the Kelvin scale is K, as adopted by the 13th General Council on Weights and 

Measures (CGPM) in 1968, and not K. Thus, 0 C equals 273.15 K. The English absolute scale, known as the Rankine scale, 

uses the symbol R and has an increment the same as that of the Fahrenheit scale. In terms of the Kelvin scale the 

cryogenic region is often considered to be that below approximately 120 K (-153 C). The common permanent gases

referred to earlier change from gas to liquid at atmospheric pressure at the temperatures shown in Table 1, called the

normal boiling point (NBP). Such liquids are known as cryogenic liquids or cryogens. When liquid helium is cooled further

to 2.17 K or below, it becomes a superfluid with very unusual properties associated with being in the quantum mechanical

ground state. For example, it has zero viscosity and produces a film that can creep up and over the walls of an open

container, such as a beaker, and drip off the bottom as long as the temperature of the container remains below 2.17 K. 

Cryogen

(K)

(°C)

(°R)

(°F)

Methane

111.7

-161.5

201.1

-258.6

Oxygen

90.2

-183.0

162.4

-297.3

Nitrogen

77.4

-195.8

139.3

-320.4

Hydrogen

20.3

-252.9

36.5

-423.2

Helium

4.2

-269.0

7.6

-452.1

Absolute zero 

0

-273.15

0

-459.67

    The measurement of cryogenic temperatures requires methods that may not be so familiar to the general public. Normal

mercury or alcohol thermometers freeze at such low temperatures and become useless. The platinum resistance 

thermometer has a well-defined behavior of electrical resistance versus temperature and is commonly used to measure

temperatures accurately, including cryogenic temperatures down to about 20 K. Certain semiconducting materials, such

as doped germanium, are also useful as electrical resistance thermometers for temperatures down to 1 K and below, as long

as they are calibrated over the range they are to be used. Such secondary thermometers are calibrated against primary

thermometers that utilize fundamental laws of physics in which a physical variable changes in a well-known theoretical way with temperature.

    The production of cryogenic temperatures almost always utilizes the compression and expansion of gases. In a typical air 

liquefaction process the air is compressed, causing it to heat, and allowed to cool back to room temperature while still

pressurized. The compressed air is further cooled in a heat exchanger before it is allowed to expand back to atmospheric

pressure. The expansion causes the air to cool and a portion of it to liquefy. The remaining cooled gaseous portion is 

returned through the other side of the heat exchanger where it precools the incoming high-pressure air before returning

to the compressor. The liquid portion is usually distilled to produce liquid oxygen, liquid nitrogen, and liquid argon. Other

gases, such as helium, are used in a similar process to produce even lower temperatures, but several stages of expansion

are necessary.

    Cryogenics has many applications. Cryogenic liquids, such as oxygen, nitrogen, and argon, are often used in industrial and 

medical applications. The electrical resistance of most metals decreases as temperature decreases. Certain metals lose all 

electrical resistance below some transition temperature and become superconductors. An electromagnet wound with a

wire of such a metal can produce extremely high magnetic fields with no generation of heat and no consumption of 

electric power once the field is established and the metal remains cold. These metals, typically niobium alloys cooled to

4.2 K, are used for the magnets of magnetic resonance imaging (MRI) systems in most hospitals.

Our Service

Established in 1998, CAN GAS SYSTMES COMPANY LIMITED, a reputable manufacturer of on-site nitrogen and oxygen plants and kinds of gases systems, has a production and R&D center with an area of 28,000 square meters, and passed ISO9001 quality management certification, BV certification and CE certification.

Feedback

Tel: +86-10-63338130

Contact Us

Address: B516, GID International Center, 27 Nanbinhe Road, Xicheng District,Beijing, China 100055.

Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML

Copyright © CANGAS Systems Company Limited

share: