Categories

Contact Us

CANGAS Systems Company Limited

B516, GID International Center, 27 Nanbinhe Road, Xicheng District, Beijing, China 100055.

Factory: Shidai Road East, Gu'an Industrial Zone, Langfang City, Hebei Provice.

Phone: +86-10-63338130

Fax: +86-1063338230

E-mail: sales@can-gas.com

Website: www.can-gas.net

www.can-gas.com

Nitrogen Generator

Nitrogen Membrane

Nitrogen Membrane

ON-SITE PSA/MEMBRANE Nitrogen Generator CANGAS hollow-fibre membrane modules produce nitrogen gas from compressed air to offer a costeffective, reliable and safe alternative to traditional cylinder or liquid nitrogen gas supplies. Nitrogen is used as a clean, dry, inert gas...

Product Details

ON-SITE PSA/MEMBRANE Nitrogen Generator

56.jpg

CANGAS hollow-fibre membrane modules produce nitrogen gas from compressed air to offer a costeffective, reliable and safe alternative to traditional cylinder or liquid nitrogen gas supplies.
Nitrogen is used as a clean, dry, inert gas primarily for removing oxygen from products and/or processes.
CANGAS modules can be built into a custom-made nitrogen generator or can be integrated with your (production) process to provide an on-demand, continuous source of nitrogen gas. Gas which can be used in a wide range of industries including food, beverage, pharmaceutical, laboratory, chemical, heat treatment, electronics, transportation, oil & gas, mining and marine.

42.jpg

Benefits
• Less membrane modules needed per nitrogen system
More nitrogen per fibre is produced from CANGAS hollow-fibre membranes than any other in the world
• Use of low pressure standard industrial compressor
No high pressure compressor needed to obtain required nitrogen flow
• Energy savings
Operation at a low pressure requires less energy
• Reduced CO2 emissions
No heater required to open polymer membrane structure, thus reducing the energy consumption
• Robust fibre
Most tolerant fibre to particle contamination
• Large membrane diameter
Lowest membrane module pressure drop

• Strong engineering plastic
Life-expectancy of more than 10 years
• Factory membrane ageing, pre-delivery
No performance decrease over time due to fibre ageing
• Quick start-up time
Required nitrogen purity is produced instantly, no time needed to heat-up
• Flexible mounting arrangements
Can be mounted horizontal or vertical
• Low noise operation
Radiated noise generated by membrane technology is extremely low
• No maintenance required
No user serviceable parts
• Small system footprint
Less modules needed to produce nitrogen requirements


FAQ

Q: Purity, flow and pressure scope?

A: for CANGAS air separation products, the answer to the question is as below.

1. PSA O2 generators: purity 93±3%; flow 1~1000m³/hour; pressure, normally 4 bar, could be  10~500bar with O2 compressor.

2. PSA O2 generators with purifier: purity 96~98%; flow 1~1000m³/hour; pressure, customizable, normally 0.2 bar, could be 4~500bar with O2 compressor.

3. VPSA O2 generators: purity 90%; flow 1~10000m³/hour; pressure, customizable, normally 0.5 bar, could be 4~500bar with O2 compressor.

4. VSA O2 generators: purity 90%; flow 1~10000m³/hour; pressure, customizable, normally 0.5 bar, could be 4~500bar with O2 compressor.

5. Membrane O2 generators: purity 40%; flow 1~10000m³/hour; pressure, customizable, normally 0.2 bar, could be 4~500bar with O2 compressor.

6. PSA N2 generators: purity 95~99.999%; flow 1~10000m³/hour; pressure, customizable, normally 6 bar, could be 10~500bar with N2 compressor.

7. PSA N2 generators with purifier: purity 99.9995~99.99999% (0.5~5ppm); flow 1~10000m³/hour; pressure, customizable, normally 5 bar, could be 10~500bar with N2 compressor.

8. Membrane N2 generators: purity 90~99.9%; flow 1~10000m³/hour; pressure, customizable, normally 6 bar, could be 10~500bar with N2 compressor.

9. H2 generators by liquid ammonia decomposition: purity, H2 99.9%, N2 99.99%~99.999%; flow, H2 1~1000m³/h, N2 1~500m³/h; pressure, customizable, normally 0.2 bar, could be 5~500 bar with H2/N2 compressors.

10. Liquid (cryogenic) N2, O2 and Ar generators: purity, N2 ≤ 5ppm, O2 ≥ 99.6%, Ar ≥ 99.999%; flow, gaseous N2 100~100000m³/h, gaseous O2 100~20000m³/h, liquid Ar 40~1000m³/h; pressure, customizable, normally 0.5 bar, could be 5~500 bar with N2/O2/Ar compressors.

Actually, for air separation plants by cryogenic technology, the kinds of product gas could be customizable - gaseous O2 and N2 with liquid Ar, or gaseous N2 with liquid N2, or liquid N2 with liquid O2, or only gaseous O2, only gaseous N2, or only liquid O2, or only liquid N2. For more details, please call or email us.

11. CANGAS filters: flow 0.1~120m³/min; pressure 0~16 bar.

12. CANGAS Heatless regenerative adsorption dryer: flow 0.1~120m³/min; pressure 0~16 bar.

Hot Tags: Nitrogen Membrane,Nitrogen Generator
Contact Now

Our Service

Established in 1998, CAN GAS SYSTMES COMPANY LIMITED, a reputable manufacturer of on-site nitrogen and oxygen plants and kinds of gases systems, has a production and R&D center with an area of 28,000 square meters, and passed ISO9001 quality management certification, BV certification and CE certification.

Feedback

Tel: +86-10-63338130

Contact Us

Address: B516, GID International Center, 27 Nanbinhe Road, Xicheng District,Beijing, China 100055.

Home | About Us | Products | News | Knowledge | Contact Us | Feedback | Mobile | XML

Copyright © CANGAS Systems Company Limited

share: